| 1. |
Water
pipe leakage |
| |
Check：(1)
If the connection tight.(2) If the cool
& hot water faucet is loose. (3)
If the valve out of order. |
| 2. |
Integral
Room water leakage |
| |
(1) leakage when
power off:
A: Pipe broken B: Pipe connection is too
loose or to tight
C: Resident water & pipe system problems
(2) leakage when using the jets:
A: The Integral Room is not sealed with
or the glass cement loose
B: The glass door is not sealed well
(3) leakage when water runs out:
A: Check the drainage B: Drainage pipe
is brokenC: Drainage moves away from the
sewerD: The sewer is blocked(Consumer
question) |
| 3. |
Nozzle
fails to jet or jet softly |
| |
A. Fail to jet:
check the electric valve if in power:
1. If no power, then the circuit is out
of order; if the electric board fails
to display, then it is out of order; if
the electric board works well then just
check the audion , if it is burnout.
2. If in power, check the electric valve
if in order.
3. If the electric valve works well ,
then check if water can runs smooth or
blocked.
4. Check if the water shift turns to the
jet position or not.
B. Jet softly:
1. The resident water pressure is too
low.2. triple valve and nozzle are blocked.3.
water valve is not opened completely.4.
water pipe is connected in series too
long. |
| 4. |
Ventilator does
not work |
| |
A. failure just
after installation:
1. Check if you upend the anode & cathode.2.
If wire connected wrongly.
B. Failure after use:
1. If plug of electrical source loose.
2. if connected well.3. if wiring sealed
off. |
| 5. |
Radio
without sound or can not reach any channel |
| |
Check:(1)
If there is no any radio & circuit sound,
it always aroused on the electric board
or failure from the circuit.(2) If hearing
the channel signal sound after turning
on the radio, then check if the speaker
works well or not.
(3) If there is no channel signal sound,
Then the small relay which controls the
radio must be out of order. |
